Heavy-duty version of our standard drawbar. Lockable. Made from aluminium.

High quality stainless steel safety cotter pin with safety rope specially designed and manufactured for the new Hinterher hitch system with strong spring catch and hole for locking function. Incl. safety rope stainless steel, coated. Weight: approx. 30 gr Scope of delivery: 1 stainless steel safety split pin incl. stainless steel safety rope, coated. Suitable hole for ABUS combination lock, order number 100-070-200-10

When the SL-stainless-steel-drawbar (Hinterher system) is used as a hand cart, it can be conveniently extended with a screw-on handle made of POM. Technical dataMade from POM12 cm length25 mm diameter45 g weightScope of deliveryPOM handle + threaded pin M8 + lock nut stainless steel.

Heavy-duty version of our standard drawbar. Lockable. Made from aluminium.

The trailer hitch for professional demands. Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust place. Adapter for using the Hinterher hitch with Weber mounting plates This hitch adapter enables you to use any mounting plate from the Weber hitch system. You can also use other mounting plates with a D 16mm hole to install this adapter. Please note that you need the joint in order to get a fully functional hitch system.Technical data Hinterher-Weber-Adapter made from stainless steel D 25 mm D 6 mm connection for mounting plate D 8 mm connection for joint 16 mm round flange suited for Weber mounting plates or any other plate with a D 16 mm hole To be screwed onto a mounting plate with M6 screw, Schnorr-securing washer and lock nut M8 85 g weight Scope of delivery Hinterher-Weber-Adapter, Schnorr securing washer, washer M8, lock nut M8

The trailer hitch for professional demands. Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust Suitable for frame installation The mounting plate No. 06 is suited for frame or dropout installation. Depending on the space constraints also consider the mounting plate No. 02 and No. 04. Please note that you need the Hinterher-Weber-Adapter and the Joint to get this mounting plate fully functional.Technical details 6mm mounting plate made of stainless steel18 mm hole spacing or 30-42 mm hole spacing (slotted hole) For M6 screws 70 x 20 mm size of base plate90 g weightScope of deliveryMounting plate

The trailer hitch for professional demands.Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust Suitable for frame installation The mounting plate No. 04 is suited for frame or dropout installation. Depending on the space constraints also consider the mounting plate No. 02. Technical details 6mm mounting plate made of stainless steel 18 mm hole spacing or 25-40 mm hole spacing (slotted hole) For M6 screws  150 g weight Scope of deliveryMounting plate

The trailer hitch for professional demands. Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust place. Adapter for using the Hinterher hitch with Weber mounting plates This hitch adapter enables you to use any mounting plate from the Weber hitch system. You can also use other mounting plates with a D 16mm hole to install this adapter. Please note that you need the joint in order to get a fully functional hitch system.Technical data Hinterher-Weber-Adapter made from stainless steel D 25 mm D 6 mm connection for mounting plate D 8 mm connection for joint 16 mm round flange suited for Weber mounting plates or any other plate with a D 16 mm hole To be screwed onto a mounting plate with M6 screw, Schnorr-securing washer and lock nut M8 85 g weight Scope of delivery Hinterher-Weber-Adapter, Schnorr securing washer, washer M8, lock nut M8

The trailer hitch for professional demands. Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust place. Technical details 6mm mounting plate made from stainless steel18 mm hole spacing or 25-40 mm hole spacing (slotted hole) For M6 screwsD8 connection for joint150 g weightScope of deliveryMounting plate

The trailer hitch for professional demands. Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust For mounting on cargo bikes with two wheels at the rearThe mounting plate No. 20 is suitable for horizontal mounting to stable construction elements of cargo wheels (platforms, boxes, tubular racks, etc.). Technical details 6 mm mounting plate of stainless steel6 holes D 6mm90 x 60 mm size of base plateD 10mm connection for joint350 g weightScope of deliveryMounting plate

The trailer hitch for professional demands. Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust For mounting on cargo bikes with two wheels at the rearThe mounting plate No. 20 is suitable for horizontal mounting to stable construction elements of cargo wheels (platforms, boxes, tubular racks, etc.). Technical details 6 mm mounting plate of stainless steel6 holes D 6mm90 x 60 mm size of base plateD 10mm connection for joint350 g weightScope of deliveryMounting plate

The trailer hitch for professional demands. Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust For mounting on cargo bikes with two wheels at the rearThe mounting plate No. 20 is suitable for horizontal mounting to stable construction elements of cargo wheels (platforms, boxes, tubular racks, etc.). Technical details 6 mm mounting plate of stainless steel6 holes D 6mm90 x 60 mm size of base plateD 10mm connection for joint350 g weightScope of deliveryMounting plate

The trailer hitch for professional demands. Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust For mounting on cargo bikes with two wheels at the rearThe mounting plate No. 20 is suitable for horizontal mounting to stable construction elements of cargo wheels (platforms, boxes, tubular racks, etc.). Technical details 6 mm mounting plate of stainless steel6 holes D 6mm90 x 60 mm size of base plateD 10mm connection for joint350 g weightScope of deliveryMounting plate

The heavy-duty drawbar extension will fit to any heavy-duty drawbar that is fitted for extensions. You can retrofit your existing heavy-duty drawbar with our connection sleeve by sending it to us.Our heavy-duty drawbar extensions are largely made by hand with custom made parts for us. This ensures a connection that can be quickly made without any tools and that is free of play. We know of no other company that offers these unique features for their drawbar extentions.

The trailer hitch for professional demands. Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust For mounting on cargo bikes with two wheels at the rearThe mounting plate No. 20 is suitable for horizontal mounting to stable construction elements of cargo wheels (platforms, boxes, tubular racks, etc.). Technical details 6 mm mounting plate of stainless steel6 holes D 6mm90 x 60 mm size of base plateD 10mm connection for joint350 g weightScope of deliveryMounting plate

If you configure your trailer with our heavy-duty hitch arm system this part enables you to use it as a handcard too. Without any tools you can quickly change the position of the heavy-duty hitch arm and click it into this hitch arm mount.Can be used with any of our Alu Chassis trailers as well as our boxing trailers when configured with the heavy-duty hitch arm system. Works with the Ursus kickstand too. When installing it you need to drill some additional holes into your trailer and two holes into your existing heavy-duty hitch arm.Made from Aluminium, cnc-milled, welded and with plastic plain bearings.

The heavy-duty drawbar extension will fit to any heavy-duty drawbar that is fitted for extensions. You can retrofit your existing heavy-duty drawbar with our connection sleeve by sending it to us.Our heavy-duty drawbar extensions are largely made by hand with custom made parts for us. This ensures a connection that can be quickly made without any tools and that is free of play. We know of no other company that offers these unique features for their drawbar extentions.

Drawbar mount for our heavy-duty drawbars. Completely revised one-piece design with newly developed extruded profile and rapid decoupling. CNC machined from aluminum, with high quality internal plastic plain bearings from German market leader IGUS. This prevents corrosion between the two metal parts of the drawbar and drawbar mount, even with prolonged use. The sliding ability and thus the long-term guarantee of the function are preserved, in contrast to many "simpler" drawbar receptacles, which consist only of a metal sleeve. Drilling distance identical to standard drawbar mount. Can easily be retrofitted to all our models. Required mounting surface min. approx. 80 x 145 mm Drilling distance 120 + 56 mm, 4 holes 6 / 6.5 mm Weight: approx. 580 g

This part enables you to use the Transporter trailers as a hand cart. Within seconds you can switch the hitch arm between hand cart mode and bicycle trailer mode.Can be retrofited to all Transporter trailers. Is compatible with the Ursus kickstand. Made from aluminium.Weight: 350 g

The drawbar for professional requirements. Robust stainless steel tube with coupling head 360° rotatable. In professional use, the previous, commercially available components of bicycle trailers reach their limits and are often loaded far beyond the approved specifications. A reasonable limit of transporting goods on a bicycle trailer with a normal, well-equipped bicycle is about 100 kg trailer weight. But since much higher continuous loads have to be considered in professional use, we have redesigned both the drawbar and all related components. Our new stainless steel drawbar system has been tested with towing weights of 500 kg. However, under no circumstances should more than 100 kg be attached to normal bicycles, as neither the bicycle frames nor the brake system are designed for these weights.Please note that we cannot give a general approval for higher weights. Our release of 150 kg refers to the complete system of SL-drawbar mount, SL-stainless-steel-drawbar and our Hinterher hitch system. As a general rule, however, you must base your planned trailer weight on the weakest component. This should then be the bicycle frame, the dropout or (when using the Hinterher stainless steel adapter with a Weber coupling plate) the load capacity of the Weber coupling plate. Key features:Extremely high load capacity (tensile weights of 500 kg were tested): Approval for 150 kg towing weight when using the appropriate Hinterher SL stainless steel components.Easy to understand, self-explanatory designThe drawbar can be rotated 90° and used as a hand drawbar. For this purpose, there is a plastic handle made of POM, which can be simply screwed on.Lockability: The 10mm locking cotter pin can be replaced by a standard padlock with a 10mm shackle, making it lockable.High degree of freedom in all directions - the hanger or bike can fall over without damaging important components. The drawbar can rotate freely 360°.Compatibility on the trailer side with existing SL drawbar mounts.Easy connection possibilities to 6mm connection plates with 8 or 10mm bore (can already be integrated on the part of the wheel manufacturers).Adapter for Weber base plates: With this stainless steel adapter, our new heavy duty drawbar can be operated on all Weber coupling plates.Adapter for base plates with vertical or horizontal bore (8 or 10 mm). This allows base plates from numerous manufacturers, e.g. BicyLift, to be used with our new rear heavy duty drawbar.Customized stainless steel drawbars made of 35 mm stainless steel tubing can be manufactured for other trailer manufacturers according to their specifications, even in small series.Easy repairability: The connections are based on 10mm holes and DIN screws, which can be repaired by universal screws, bolts, split pins etc. if necessary.Technical details1250 g weight83 cm total length35 x 1.5 mm stainless steel tubeScope of delivery:Stainless steel drawbar incl. rotating coupling head + safety split pin with safety rope.The POM handle shown in the photos can be ordered separately if required, if the drawbar is to be used as a handcart handle.

The drawbar for professional requirements. Robust stainless steel tube with coupling head 360° rotatable. In professional use, the previous, commercially available components of bicycle trailers reach their limits and are often loaded far beyond the approved specifications. A reasonable limit of transporting goods on a bicycle trailer with a normal, well-equipped bicycle is about 100 kg trailer weight. But since much higher continuous loads have to be considered in professional use, we have redesigned both the drawbar and all related components. Our new stainless steel heavy drawbar system has been tested with towing weights of 500 kg. However, under no circumstances should more than 100 kg be attached to normal bicycles, as neither the bicycle frames nor the brake system are designed for these weights. Please note that we cannot give a general approval for higher weights. Our release of 100 kg refers to the complete system of SL-drawbar mount, SL-stainless-steel-drawbar and our Hinterher hitch system. As a general rule, however, you must base your planned trailer weight on the weakest component. This should then be the bicycle frame, the dropout or (when using the Hinterher stainless steel adapter with a Weber coupling plate) the load capacity of the Weber coupling plate. Key featuresExtremely high load capacity (tensile weights of 500 kg were tested): Approval for 150 kg towing weight when using the appropriate Hinterher SL stainless steel components. Easy to understand, self-explanatory designThe drawbar can be rotated 90° and used as a hand drawbar. For this purpose, there is a plastic handle made of POM, which can be simply screwed on.Lockability: The 10mm locking cotter pin can be replaced by a standard padlock with a 10mm shackle, making it lockable.High degree of freedom in all directions - the hanger or bike can fall over without damaging important components. ° The drawbar can rotate freely 360°.Compatibility on the trailer side with existing SL drawbar mounts.Easy connection possibilities to 6mm connection plates with 8 or 10mm bore (can already be integrated on the part of the wheel manufacturers).Adapter for Weber base plates: With this stainless steel adapter, our new heavy duty drawbar can be operated on all Weber coupling plates.Adapter for base plates with vertical or horizontal bore (8 or 10 mm). This allows base plates from numerous manufacturers, e.g. BicyLift, to be used with our new rear heavy duty drawbar.Customized stainless steel drawbars made of 35 mm stainless steel tubing can be manufactured for other trailer manufacturers according to their specifications, even in small series.Easy repairability: The connections are based on 10mm holes and DIN screws, which can be repaired by universal screws, bolts, split pins etc. if necessary.Technical details1250 g weight120 cm total length35 x 1.5 mm stainless steel tubeScope of delivery:Stainless steel drawbar incl. rotating coupling head + safety split pin with safety rope.The POM handle shown in the photos can be ordered separately if required, if the drawbar is to be used as a handcart handle.

The drawbar for professional requirements. Robust stainless steel tube with coupling head 360° rotatable. In professional use, the previous, commercially available components of bicycle trailers reach their limits and are often loaded far beyond the approved specifications. A reasonable limit of transporting goods on a bicycle trailer with a normal, well-equipped bicycle is about 100 kg trailer weight. But since much higher continuous loads have to be considered in professional use, we have redesigned both the drawbar and all related components. Our new stainless steel heavy drawbar system has been tested with towing weights of 500 kg. However, under no circumstances should more than 100 kg be attached to normal bicycles, as neither the bicycle frames nor the brake system are designed for these weights. Please note that we cannot give a general approval for higher weights. Our release of 100 kg refers to the complete system of SL-drawbar mount, SL-stainless-steel-drawbar and our Hinterher hitch system. As a general rule, however, you must base your planned trailer weight on the weakest component. This should then be the bicycle frame, the dropout or (when using the Hinterher stainless steel adapter with a Weber coupling plate) the load capacity of the Weber coupling plate. Key features:Extremely high load capacity (tensile weights of 500 kg were tested): Approval for 150 kg towing weight when using the appropriate Hinterher SL stainless steel components. Easy to understand, self-explanatory design The drawbar can be rotated 90° and used as a hand drawbar. For this purpose, there is a plastic handle made of POM, which can be simply screwed on. Lockability: The 10mm locking cotter pin can be replaced by a standard padlock with a 10mm shackle, making it lockable.  High degree of freedom in all directions - the hanger or bike can fall over without damaging important components. The drawbar can rotate freely 360°. °Compatibility on the trailer side with existing SL drawbar mounts.  Easy connection possibilities to 6mm connection plates with 8 or 10mm bore (can already be integrated on the part of the wheel manufacturers). Adapter for Weber base plates: With this stainless steel adapter, our new heavy duty drawbar can be operated on all Weber coupling plates. Adapter for base plates with vertical or horizontal bore (8 or 10 mm). This allows base plates from numerous manufacturers, e.g. BicyLift, to be used with our new rear heavy duty drawbar. Customized stainless steel drawbars made of 35 mm stainless steel tubing can be manufactured for other trailer manufacturers according to their specifications, even in small series. Easy repairability: The connections are based on 10mm holes and DIN screws, which can be repaired by universal screws, bolts, split pins etc. if necessary. Technical details1250 g weight83 cm length35 x 1.5mm stainless steel tubingScope of delivery: Stainless steel drawbar incl. rotating coupling head + safety split pin with safety rope. The POM handle shown in the photos can be ordered separately if required, if the drawbar is to be used as a handcart handle.

The drawbar for professional requirements. Robust stainless steel tube with coupling head 360° rotatable. In professional use, the previous, commercially available components of bicycle trailers reach their limits and are often loaded far beyond the approved specifications. A reasonable limit of transporting goods on a bicycle trailer with a normal, well-equipped bicycle is about 100 kg trailer weight. But since much higher continuous loads have to be considered in professional use, we have redesigned both the drawbar and all related components. Our new stainless steel heavy drawbar system has been tested with towing weights of 500 kg. However, under no circumstances should more than 100 kg be attached to normal bicycles, as neither the bicycle frames nor the brake system are designed for these weights. Please note that we cannot give a general approval for higher weights. Our release of 100 kg refers to the complete system of SL-drawbar mount, SL-stainless-steel-drawbar and our Hinterher hitch system. As a general rule, however, you must base your planned trailer weight on the weakest component. This should then be the bicycle frame, the dropout or (when using the Hinterher stainless steel adapter with a Weber coupling plate) the load capacity of the Weber coupling plate. Key features:Extremely high load capacity (tensile weights of 500 kg were tested): Approval for 150 kg towing weight when using the appropriate Hinterher SL stainless steel components. Easy to understand, self-explanatory design The drawbar can be rotated 90° and used as a hand drawbar. For this purpose, there is a plastic handle made of POM, which can be simply screwed on. Lockability: The 10mm locking cotter pin can be replaced by a standard padlock with a 10mm shackle, making it lockable.  High degree of freedom in all directions - the hanger or bike can fall over without damaging important components. The drawbar can rotate freely 360°. °Compatibility on the trailer side with existing SL drawbar mounts.  Easy connection possibilities to 6mm connection plates with 8 or 10mm bore (can already be integrated on the part of the wheel manufacturers). Adapter for Weber base plates: With this stainless steel adapter, our new heavy duty drawbar can be operated on all Weber coupling plates. Adapter for base plates with vertical or horizontal bore (8 or 10 mm). This allows base plates from numerous manufacturers, e.g. BicyLift, to be used with our new rear heavy duty drawbar. Customized stainless steel drawbars made of 35 mm stainless steel tubing can be manufactured for other trailer manufacturers according to their specifications, even in small series. Easy repairability: The connections are based on 10mm holes and DIN screws, which can be repaired by universal screws, bolts, split pins etc. if necessary. Technical details1250 g weight83 cm length35 x 1.5mm stainless steel tubingScope of delivery: Stainless steel drawbar incl. rotating coupling head + safety split pin with safety rope. The POM handle shown in the photos can be ordered separately if required, if the drawbar is to be used as a handcart handle.