Other accessories

End cap D 15 mm

Self-locking plastic cap for pressing into open round tubes Ø 15 mm

€0.89*

End cap for round tubes D 20 mm, wall thickness 0.8-2.5 mm

Self-locking plastic cap for pressing into open round tubes Ø 20 mm

€0.95*

Spacer round Ø 30 x 5 mm

Spacer round Ø 30 x 5 mm Hole approx. 8.1 mm Polyethylene black

€0.95*

Spacer round, concave Ø 15 mm

Polyethylene black Plastic spacer sleeve for pipes. Tube diameter 15mm. Bore approx. 6.3 mm

€1.00*

End cap for round tubes D 25 mm, wall thickness 1-3 mm

Self-locking plastic cap for pressing into open round tubes Ø 25 mm

€1.01*

Spacer round, concave Ø 20 mm

Polyethylene black Plastic spacer sleeve for pipes. Tube diameter 20mm. Bore approx. 6.3 mm

€1.07*

End cap for round tubes 30 mm, wall thickness 1-1.5 mm

Self-locking plastic cap for pressing into open round tubes Ø 30 mm

€1.07*

End cap for round tubes 35 mm, wall thickness 2-2.5mm

Self-locking plastic cap for pressing into open round tubes Ø 35 mm

€1.13*

Spacer round, concave Ø 30 mm

Polyethylene black Plastic spacer sleeve for pipes Pipe diameter 30mm Bore approx. 8.3 mm

€1.13*

Tarpaulin button black

High-quality tarpaulin button made of plastic. Attractively designed for optimum handling. With internal thread and M6x16 countersunk screw. Standard screw length M6 x 16 suitable for 4mm sheet thickness (aluminium chassis of the rear trailers). Other screw lengths available on request. Please indicate when ordering Diameter approx. 20 mm Height approx. 15 mm Weight approx. 2,7 gr (without screw)

From €1.19*

Details

Expand rubber cord 5mm

Expand rubber cord 5mm in black

€1.20*

Rubber cord clamp

Rubber cord clamp made of plastic for 5mm cords.

€1.40*

Multi-Frame: Concave tube end with internal guide for tension cable

We developed this injection-moulded part ourselves for our Multi-Frame system. It is inserted into each end of a longitudinal tube. This allows the longitudinal tubes to be inserted into the holes of the U-brackets. A tension cable can be passed through the hole inside the linkage, which tightens and stiffens the whole multi-frame system.

€1.40*

Clip hooks for tensioning straps single

Menge: 1 Stück

Plastic clip hooks individually for self-made fastening straps etc. with graduated prices 1 / 10 / 100 / 1000 pcs. Very robust and well-made plastic clip hook, which we developed ourselves. The clip is simply hooked in and cannot unhook by itself. When unhooking, use your thumb as a lever with a slight twisting movement. Optimised geometry for maximum power transmission with an elegant appearance.Suitable for 25 mm webbing Ideal for use with the webbing slots in our aluminium chassis and the Wichard webbing eyelets. Dimensions approx. H 43 mm W 35 mm Weight approx. 9.7 gr / piece

€1.40*

Trolley handle spacer

Spacer made of high-quality POM with matching hole for simultaneous mounting of the trolley handle with the rigid axle stainless steel. Since both components are normally in the same plane, the trolley handle must be mounted with these spacers. Four spacers are required for the trolley handle. Weight: approx. 28 g

€6.80*

Ballistol universal oil spray can 200 ml

Legendary universal oil - tried and tested for generations!BALLISTOL can be used on metalls, rubber, wood, leather and many other materials. It neutralizes acid residues that encourage rust. BALISTOL neither ages nor resinates. All ingredients are bio-degradable and safe for the environment. Use this oil on a regular basis to lubricate and protect the quick release axles of our trailers as well as the ball bearings of the wheels. For the plastic parts of our trialers (hitch adapter) use the silikon spray

€7.90*

Ballistol silicon oil spray

Use this silicon oil spray to clean and protect the plastic or rubber parts on our trailer.This silicon spray prevents plastic or rubber from getting embrittled. It's ideal for caring and protecting the hitch arm and the hitch arm adapter of your bike.

€7.90*

Trolley handle clamping piece

Plastic injection moulding made of glass-fibre tempered plastic. With eccentric lever + screws M6 x 16 + M6 x 30 mm Inox (please specify other screw lengths when ordering). Suitable for tubes with a diameter of 15 mm. Can also be used as a holder for small banners, flags, advertising boards. Incl. one pressed-in locking nut stainless steel M6 2 holes 6 / 6.5 mm / drilling distance 38 mm

€7.90*

Webbing eyelet for aluminium boxes

This high-quality webbing eyelet is forged from stainless steel by Wichard for yachting. It doesn't get any better than this. We recommend equipping our aluminium boxes with four or six such lashing points. This turns the box lid into an additional loading area for extra-long or voluminous and light things. The webbing eyelets take up very little space, are virtually indestructible and work excellently with our special tensioning strap and its plastic clip hooks. They also offer a firmly defined tensioning point where the tensioning strap cannot slip (as with the lid railing). We cut an additional internal thread (M6) at each end of the webbing eyelet and supply a counter plate with matching holes made of aluminium as well as stainless steel screws and sealing washers. For complete orders with assembly, we also supply the rubber cord, which can be pulled crosswise through four webbing eyelets (or six for the large boxes) and knotted. In this way, light things can be stowed on the aluminium crates particularly quickly. Scope of delivery: 1 webbing eyelet 1 aluminium counter plate 2 pan head screws 2 stainless steel sealing washers

€12.80*

Splashback LATZ XL by FAHRER Berlin

The XL version of the FAHRER LATZ is specially designed for use with trailers. Due to its extra-long design, it optimally protects the trailer from wetness and dirt during the journey.The LATZ can be easily attached to the rear of the mudguard as a splash guard. It is made from environmentally friendly truck tarpaulin material.

€13.80*

SL-aluminium-drawbar (Weber-System)

Heavy-duty version of our standard drawbar. Lockable. Made from aluminium.

Content: 8 Stück (€2.48* / 1 Stück)

€19.80*

Wall mount

The wall mount makes it very easy to hang the trailer on the wall. A specially turned plastic part fits perfectly through the triangular cut-out in the base of the alu chassis and protects it from damage to the paintwork. In principle, it fits all models with openings in the chassis floor. Two holders are recommended for the large Transporter models. The wall mount with hanger bolt can be screwed directly into wooden beams. For concrete walls and masonry, the wall plug 14mm must be used. Attention: The turned plastic part is either inserted through the triangular cut-out or, in the case of the Light models, through any other cut-out in the base of the chassis. When ordering, please note that one of the cut-outs on your trailer must be open. This means, for example, that this opening is covered when the central SL hand drawbar mount is fitted. It is therefore possible that the wall mount is not compatible with your model. You are welcome to ask us about this in advance. For some attachments, it may also be necessary to replace the hanger bolt supplied with the hanger with a longer bolt (DIY store). In principle, however, the hanger can be suspended from the front or the rear. Caution: Depending on the wall situation, different fastening options can and must be considered. Concrete wall: Use of an adhesive dowel/glue mortar (Fischer HIT or similar) or plastic dowel with Drywall: cavity dowel Brick wall (porous): Screen sleeve in combination with adhesive dowel (Fischer HIT or similar) or hanger bolt with dowel.

€19.80*

Multi-Frame: Corner clamp stainless steel

Corner clamp specially developed by Hinterher made of 3 mm stainless steel sheet for bolting in the corners of chassis trailers. Fixing of tubes, tube frames etc. with tube diameter 25 mm.Scope of delivery 1x corner clamp 2x countersunk screws A2 M6 x 16 + stop nuts 2x large washers M6 1x countersunk screw A2 M6 x 25 1x eccentric clamping lever Holes in the chassis must be drilled by yourself

€23.80*

Stand (for 20 inch wheels, replacement part)

The stand is made from stainless steel and only works together with the drawbar mount. This is a replacement part only for all standard drawbar mounts that are used on trailers with 20 inch wheels.

€30.00*