High-quality tarpaulin button made of plastic. Attractively designed for optimum handling.
With internal thread and M6x16 countersunk screw.
Standard screw length M6 x 16 suitable for 4mm sheet thickness (aluminium chassis of the rear trailers).
Other screw lengths available on request.
Please indicate when ordering
Diameter approx. 20 mm
Height approx. 15 mm
Weight approx. 2,7 gr (without screw)
We developed this injection-moulded part ourselves for our Multi-Frame system. It is inserted into each end of a longitudinal tube. This allows the longitudinal tubes to be inserted into the holes of the U-brackets. A tension cable can be passed through the hole inside the linkage, which tightens and stiffens the whole multi-frame system.
Plastic clip hooks individually for self-made fastening straps etc.
with graduated prices 1 / 10 / 100 / 1000 pcs.
Very robust and well-made plastic clip hook, which we developed ourselves.
The clip is simply hooked in and cannot unhook by itself.
When unhooking, use your thumb as a lever with a slight twisting movement.
Optimised geometry for maximum power transmission with an elegant appearance.Suitable for 25 mm webbing
Ideal for use with the webbing slots in our aluminium chassis and the Wichard webbing eyelets.
Dimensions approx. H 43 mm W 35 mm
Weight approx. 9.7 gr / piece
So that the thru axle can not slip out of the hub of the wheel, it is held in position with a rubber ring. If the wheel is clicked into our plastic axle mount, a spacer is additionally required on the thru axle.
When using the continuous stainless steel axles, only a rubber ring is needed.
Spare part set for the axle system 12/20Includes: 2 rubber rings, 2 spacers
Spacer made of high-quality POM with matching hole for simultaneous mounting of the trolley handle with the rigid axle stainless steel. Since both components are normally in the same plane, the trolley handle must be mounted with these spacers. Four spacers are required for the trolley handle.
Weight: approx. 28 g
Legendary universal oil - tried and tested for generations!BALLISTOL can be used on metalls, rubber, wood, leather and many other materials. It neutralizes acid residues that encourage rust. BALISTOL neither ages nor resinates. All ingredients are bio-degradable and safe for the environment. Use this oil on a regular basis to lubricate and protect the quick release axles of our trailers as well as the ball bearings of the wheels. For the plastic parts of our trialers (hitch adapter) use the silikon spray
Use this silicon oil spray to clean and protect the plastic or rubber parts on our trailer.This silicon spray prevents plastic or rubber from getting embrittled. It's ideal for caring and protecting the hitch arm and the hitch arm adapter of your bike.
Plastic injection moulding made of glass-fibre tempered plastic. With eccentric lever + screws M6 x 16 + M6 x 30 mm Inox (please specify other screw lengths when ordering). Suitable for tubes with a diameter of 15 mm.
Can also be used as a holder for small banners, flags, advertising boards.
Incl. one pressed-in locking nut stainless steel M6
2 holes 6 / 6.5 mm / drilling distance 38 mm
Special thru axle for our 12 inch wheel. This thru axle does not work with any other wheel.Technical data
Axle diameter: 12 mm
Weight: approx. 100 g Scope of delivery12 inch wheel including plastic spacer and rubber o-ring
If the Weber hitch is to be mounted on the bike stand, special spacer sleeves are almost always required to create a flat mounting surface. The surface of most bicycle stands are not flat, but curved, so that spacer sleeves are necessary here, which are inserted in each of the two drill holes of the stand mount. In addition, some bike stands may have countersunk screws that require conical spacer sleeves. Other stands have cylinder head screws installed that require flat spacer sleeves. In case of doubt, please send us photos by email to make your selection easier.
Scope of delivery: 2 pieces
If the Weber hitch is to be mounted on the bike stand, special spacer sleeves are almost always required to create a flat mounting surface.
The surface of most bicycle stands are not flat, but curved, so that spacer sleeves are necessary here, which are inserted in each of the two drill holes of the stand mount. In addition, some bike stands may have countersunk screws that require conical spacer sleeves. Other stands have cylinder head screws installed that require flat spacer sleeves. In case of doubt, please send us photos by email to make your selection easier.
Scope of delivery: 2 pieces
€10.59*
This website uses cookies to ensure the best experience possible. More information...
