If the Weber hitch is to be mounted on the bike stand, special spacer sleeves are almost always required to create a flat mounting surface. The surface of most bicycle stands are not flat, but curved, so that spacer sleeves are necessary here, which are inserted in each of the two drill holes of the stand mount. In addition, some bike stands may have countersunk screws that require conical spacer sleeves. Other stands have cylinder head screws installed that require flat spacer sleeves. In case of doubt, please send us photos by email to make your selection easier.
Scope of delivery: 2 pieces
If the Weber hitch is to be mounted on the bike stand, special spacer sleeves are almost always required to create a flat mounting surface.
The surface of most bicycle stands are not flat, but curved, so that spacer sleeves are necessary here, which are inserted in each of the two drill holes of the stand mount. In addition, some bike stands may have countersunk screws that require conical spacer sleeves. Other stands have cylinder head screws installed that require flat spacer sleeves. In case of doubt, please send us photos by email to make your selection easier.
Scope of delivery: 2 pieces
For mounting the Weber EL, E or ES hitch on frames, where the rear wheel axle is set back within the frame. Because the Weber hitch needs a certain amount of space this special polygon acts as a reducer to bridge the distance to the outer boundaries of your frame.Please measure the distance from the rear axle to the outside of the frame tubes sourrounding the rear wheel axle.
If your bike has hub gears like Shimano Nexus, Alfine or Enviolo, you need this special "Polygon" from Weber in order to install the Weber EL, E or ES hitch on the rear wheel axle. The Weber hitch needs a special Polygon to ensure that the hitch itself can not rotate around its own axis. But because the hub gear systems need exactly the same part for themself you have to replace this existing part that works for the hub system as well as the Weber hitch.Here is how to find the right "Polygon" for your bike:1. What is the manufacturer of your gear hub (e.g. Shimano)?2. What color has the existing washer underneath the big bolt on your rear-wheel axle (on the left side in driving direction)? With these two pieces of information you are able to find the matching Weber Polygon for you.
This axle adapter is used to be able to mount the Weber EL, E or ES hitch directly on the axle of a hub gear. The axle adapter is necessary when the direct mounting of the hitch on the axle is not possible for space reasons, for example, because the frame is offset inward at this point.
The axle adapter is screwed onto the axle instead of the cap nut. The anti-rotation device of the hub gear remains in place. The Weber coupling is then screwed onto the outside.
This axle adapter is used to be able to mount the Weber EL, E or ES hitch directly on the axle of a hub gear. The axle adapter is necessary when the direct mounting of the hitch on the axle is not possible for space reasons, for example, because the frame is offset inward at this point.
The axle adapter is screwed onto the axle instead of the cap nut. The anti-rotation device of the hub gear remains in place. The Weber coupling is then screwed onto the outside.
In case there is too little space for mounting the Weber EP hitch in the original way the EP Adapter should be used. With the EP Adapter the EP hitch can be mounted directly underneath the kickstand on the frontside of the bike.
In case the quick release skewer on the rear wheel of your bike has not enough threads left to accomodate the Weber EL, E or ES hitch you can replace it with this extra long quick release skewer.
The trailer hitch for professional demands.
Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust place.
Technical details
6mm mounting plate made from stainless steel18 mm hole spacing or
25-40 mm hole spacing (slotted hole)
For M6 screwsD8 connection for joint150 g weightScope of deliveryMounting plate
The trailer hitch for professional demands.
Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust
Suitable for frame installation
The mounting plate No. 06 is suited for frame or dropout installation. Depending on the space constraints also consider the mounting plate No. 02 and No. 04.
Please note that you need the Hinterher-Weber-Adapter and the Joint to get this mounting plate fully functional.Technical details
6mm mounting plate made of stainless steel18 mm hole spacing or 30-42 mm hole spacing (slotted hole)
For M6 screws
70 x 20 mm size of base plate90 g weightScope of deliveryMounting plate
The trailer hitch for professional demands.Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust
Suitable for frame installation
The mounting plate No. 04 is suited for frame or dropout installation. Depending on the space constraints also consider the mounting plate No. 02.
Technical details
6mm mounting plate made of stainless steel
18 mm hole spacing or
25-40 mm hole spacing (slotted hole)
For M6 screws
150 g weight
Scope of deliveryMounting plate
The Weber EL hitch fits almost all bikes with derailleur gears. If a bicycle stand is attached to the frame near the rear wheel axle, we recommend mounting the hitch on top of the stand (Weber hitch EH, EP or EU), so that the folded up stand can not collide with the drawbar of the trailer. Fits solid axles and quick release axles. For thru-axles you need a replacement axle by Weber.
Approved for load transport, towing capacity up to 80 kg.
Please inform yourself about the hitch that fits your bike before you order! You are welcome to send us photos of the left dropout of your bike frame by e-mail, in most cases this is enough to pick out the right hitch.
The trailer hitch for professional demands.
Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust place.
Adapter for using the Hinterher hitch with Weber mounting plates
This hitch adapter enables you to use any mounting plate from the Weber hitch system. You can also use other mounting plates with a D 16mm hole to install this adapter.
Please note that you need the joint in order to get a fully functional hitch system.Technical data
Hinterher-Weber-Adapter made from stainless steel
D 25 mm
D 6 mm connection for mounting plate
D 8 mm connection for joint
16 mm round flange suited for Weber mounting plates or any other plate with a D 16 mm hole
To be screwed onto a mounting plate with M6 screw, Schnorr-securing washer and lock nut M8
85 g weight
Scope of delivery
Hinterher-Weber-Adapter, Schnorr securing washer, washer M8, lock nut M8
The trailer hitch for professional demands.
Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust
For mounting on cargo bikes with two wheels at the rearThe mounting plate No. 20 is suitable for horizontal mounting to stable construction elements of cargo wheels (platforms, boxes, tubular racks, etc.).
Technical details
6 mm mounting plate of stainless steel6 holes D 6mm90 x 60 mm size of base plateD 10mm connection for joint350 g weightScope of deliveryMounting plate
The trailer hitch for professional demands.
Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust place.
Adapter for using the Hinterher hitch with Weber mounting plates
This hitch adapter enables you to use any mounting plate from the Weber hitch system. You can also use other mounting plates with a D 16mm hole to install this adapter.
Please note that you need the joint in order to get a fully functional hitch system.Technical data
Hinterher-Weber-Adapter made from stainless steel
D 25 mm
D 6 mm connection for mounting plate
D 8 mm connection for joint
16 mm round flange suited for Weber mounting plates or any other plate with a D 16 mm hole
To be screwed onto a mounting plate with M6 screw, Schnorr-securing washer and lock nut M8
85 g weight
Scope of delivery
Hinterher-Weber-Adapter, Schnorr securing washer, washer M8, lock nut M8
The Weber E hitch fits almost all bikes with derailleur gears. If a bicycle stand is attached to the frame near the rear wheel axle, we recommend mounting the hitch on top of the stand (Weber hitch EH, EP or EU), so that the folded up stand can not collide with the drawbar of the trailer.
Fits solid axles and quick release axles. For thru-axles you need a replacement axle by Weber.
Approved for load transport as well as towing a trailer with children. Towing capacity up to 80 kg. Please inform yourself about the hitch that fits your bike before you order! You are welcome to send us photos of the left dropout of your bike frame by e-mail, in most cases this is enough to pick out the right hitch.
In case your bicycles frame has two holes for mounting a kickstand that are 40mm apart the Weber EH hitch is for you. Approved for a towing capacity of 80 kg including towing kids.In case you are unsure which Weber hitch type will fit your bike please send us a picture of the left side of your rear wheel (in the direction of travel).
The trailer hitch for professional demands.
Our Hinterher hitch is made entierely from stainless steel and works together with the SL-stainless-steel-drawbars (Hinterher system). We have designed the Hinterher hitch and drawbar system for bicycle trailers that are used professionally, daily or with very heavy loads. For optimal performance we recommend mounting the hitch to your frame at the most robust
For mounting on cargo bikes with two wheels at the rearThe mounting plate No. 20 is suitable for horizontal mounting to stable construction elements of cargo wheels (platforms, boxes, tubular racks, etc.).
Technical details
6 mm mounting plate of stainless steel6 holes D 6mm90 x 60 mm size of base plateD 10mm connection for joint350 g weightScope of deliveryMounting plate
In case your bicycles frame has two holes for mounting a kickstand that are 18mm apart the Weber EP hitch is the right choice for you. Approved for a towing capacity of 80 kg including towing kids.In case you are unsure which Weber hitch type will fit your bike please send us a picture of the left side of your rear wheel (in the direction of travel).
In case your bicycles frame has a kickstand installed whose two screws are set 18mm apart the Weber EU can be mounted directly ontop of it. Please note that because the kickstand usually has not a flat but curved shape you`ll need to use some spacers (please order seperately).Approved for a towing capacity of 80 kg including towing kids.In case you are unsure which Weber hitch type will fit your bike please send us a picture of the left side of your rear wheel (in the direction of travel).
If your bikes frame has no holes for the installation of a kickstand and the Weber hitch cannot be installed at the rear wheel axle the Weber BO hitch could be a solution.
The Weber EK hitch fits the Brompton dropout in the form modified by us.
With this solution, the anti-rotation lock is achieved using a special Nordlock washer. However, as this anti-twist device can only take a limited load, the maximum tensile load is limited to 60 kg. However, you should not hang more than this on a folding bike anyway.
Approved for load transport, tensile load up to max. 60 kg Scope of delivery:
Weber-EK coupling, modified for axle diameter 10.2 mm
Nordlock washer M10 (1 piece)
The Weber EK hitch fits the Brompton dropout in the form modified by us.
With this solution, the anti-rotation lock is achieved using a special Nordlock washer. However, as this anti-twist device can only take a limited load, the maximum tensile load is limited to 60 kg. However, you should not hang more than this on a folding bike anyway.
Approved for load transport, tensile load up to max. 60 kg Scope of delivery:
Weber-EK coupling, modified for axle diameter 10.2 mm
Nordlock washer M10 (1 piece)
Hitch for sliding dropouts. Some bikes with a hub shifting system have sliding dropouts where this version of the Weber hitch can be installed.Approved for a towing capacity of 80 kg including towing kids.In case you are unsure which Weber hitch type will fit your bike please send us a picture of the left side of your rear wheel (in the direction of travel).
€58.90*
This website uses cookies to ensure the best experience possible. More information...