This thru axle must be used if the reinforced wheel is to be attached to the suspension (see compatibility). Technical data Axle diameter: 12 mm Weight: approx. 100 g Scope of delivery 1x thru axle 12 mm short (approx. 94 mm) black 2x plastic spacers 5 mm + O-ring Compatibility Compatible with Wheel heavy-duty 20 x 2.35 PickUp Note Please ensure that our thru axles are properly maintained! To prevent rust, we recommend using high-quality, fine oils or greases on the axle and ball bearings. Clean your axles regularly and test their function to ensure that they are working properly. Product safety information can be found here.

Suitable thru axle for all wheels used with our suspension system (exception: reinforced wheel, see compatibility). Technical data Axle diameter: 12 mm Weight: approx. 100 g Scope of delivery1x 12mm Thru axle short1x 5mm SpacerCompatibility Compatible with the 16 x 2.00 Big Apple silver wheel Compatible with the 16 x 2.00 Big Apple black wheel Compatible with the 20 x 2.00 Big Apple silver wheel Compatible with the 20 x 2.00 Big Apple black wheel Compatible with the 20 x 2.35 Smart Sam wheel Compatible with the 20 x 2.40 Super Moto X wheel Compatible with the 20 x 2.35 PickUp wheel Compatible with the 20 x 4.00 Fattyre wheel Compatible with the 24 x 2.35 Smart Sam wheel Caution After inserting the wheel with the short thru axle into the swing arm, the clamping screw in the swing arm must be tightened by hand! Note Please ensure that our thru axles are properly maintained! To prevent rust, we recommend using high-quality, fine oils or greases on the axle and ball bearings. Clean your axles regularly and test their function to ensure that they are working properly. Product safety information can be found here.

Our high-performance suspension is now also available as a kit. It features an enormous spring travel of 90 mm and genuine hydraulic damping. It can bear a total weight of up to 100 kg and can be adjusted even better to three different weight ranges by simply moving a screw. Technical data Suspension component material: aircraft aluminium, CNC-milled, plain bearings from Igus Spring element: DNM DV-22 with 150 mm installation length Spring rate: 350 LBS (standard), 450 LBS (on request) Weight: approx. 2.5 kg Scope of delivery Complete suspension system including stainless steel axle (cut to size for you) 2 DNM DV-22 spring elements with steel spring rate 350 LBS, ready installed Retrofit for rear aluminium chassis model: 12 M6x20 A2 countersunk screws including washers (small) and nuts. Retrofitting Hinterher transporter models: 12 countersunk screws M6x25 A2 incl. washers (small) and nuts. DIY project: No screws included, as construction is unknown. Ordering process 1. Please let us know the outer width of your bike trailer. We will use this measurement to adjust the length of the stainless steel axle for you. 2. If the suspension is retrofitted to a Hinterher bike trailer, you can use your existing wheels and simply request shorter thru axles from us. 3. If you do not yet have wheels from us, you will need to order them together with short thru axles (we recommend 20-inch wheels). Suspension installation The suspension is bolted flush to the outside of the bicycle trailer so that the swing arm can move freely next to the trailer with a few millimetres of clearance. You can find the operating instructions and installation instructions for the suspension on our download page. Note Please note that we do not provide any guarantee or warranty if the suspension is installed incorrectly. We also cannot provide any guarantee or warranty if you use our suspension with third-party wheels and thru axles.

Our high-performance suspension is now also available as a kit. It features an enormous spring travel of 90 mm and genuine hydraulic damping. It can bear a total weight of up to 100 kg and can be adjusted even better to three different weight ranges by simply moving a screw. Technical data Suspension component material: aircraft aluminium, CNC-milled, plain bearings from Igus Spring element: DNM DV-22 with 150 mm installation length Spring rate: 350 LBS (standard), 450 LBS (on request) Weight: approx. 2.5 kg Scope of delivery Complete suspension system including stainless steel axle (cut to size for you) 2 DNM DV-22 spring elements with steel spring rate 350 LBS, ready installed Retrofit for rear aluminium chassis model: 12 M6x20 A2 countersunk screws including washers (small) and nuts. Retrofitting Hinterher transporter models: 12 countersunk screws M6x25 A2 incl. washers (small) and nuts. DIY project: No screws included, as construction is unknown. Ordering process 1. Please let us know the outer width of your bike trailer. We will use this measurement to adjust the length of the stainless steel axle for you. 2. If the suspension is retrofitted to a Hinterher bike trailer, you can use your existing wheels and simply request shorter thru axles from us. 3. If you do not yet have wheels from us, you will need to order them together with short thru axles (we recommend 20-inch wheels). Suspension installation The suspension is bolted flush to the outside of the bicycle trailer so that the swing arm can move freely next to the trailer with a few millimetres of clearance. You can find the operating instructions and installation instructions for the suspension on our download page. Note Please note that we do not provide any guarantee or warranty if the suspension is installed incorrectly. We also cannot provide any guarantee or warranty if you use our suspension with third-party wheels and thru axles.