H2O - 66 customized

The ingenious almost-everything trailer
The H2O is an extremely efficient and highly resilient transport trailer for canoes, kayaks, stand-up paddle boards, surfboards or inflatable boats. It is the result of several years of development and countless prototypes and experiences with the most diverse models and applications. The H2O can be completely disassembled in seconds without tools. So it fits in every boot and every boat, and yet it is ready for immediate use when needed. We offer two different widths for free configuration. For most requirements, our H2O - 66 complete set is ideal + variably equipped.

The aluminium chassis
The basis of the H2O is its heavy-duty aluminium chassis, which is cnc-milled, bent and black powder-coated. The various cut-outs serve to reduce weight and at the same time integrate various functions such as drawbar connection, bracing and bolting points. Depending on the type of boat, our tubes or wings provide an ideal support surface for safe transport. Without the tow bar, the H2O can be used as a high-quality boat trolley.

Tubes or Wings
Our tubes offer the ideal support surface for almost all boat types and boards. They provide sufficient longitudinal guidance in the direction of travel. With longer screws and spacers (not included in the standard delivery of the tubes), the tubes can be screwed onto the H2O at a greater distance to give V-shaped hull profiles the necessary clearance. For particularly sensitive boat types, we recommend the Wings. Here the boat or board rests in a "loop bed" of straps. The wings are also necessary if the boat is wider than the space between the wheels, so that the boat lies above the wheel plane. If it is possible to transport the boat with the extendable axles between the wheels, this is the preferred method of transport for several reasons.

The drawbar system
For towing a boat by bicycle, even on bad roads, it is absolutely necessary that the boat or board can be lashed firmly and stably to the trailer. It must also be possible to safely transfer the considerable forces from the trailer to the bicycle when braking, downhill or in curves. This can only be guaranteed if the boat or board can be lashed to the trailer and the drawbar to form a unit and if the coupling system is attached to the bicycle in a solid manner. This is exactly the very elaborate way we go with the H2O. Everything else is a half-baked solution and only serves to save costs. As always, this also applies to the materials used: only the panniers are made of textiles. The aluminium and stainless steel components we have developed over many years may not be cheap, but they deliver what they promise. Everything else is supposed cost savings at the expense of longevity and durability.

Low drawbar or high drawbar
In principle, we recommend the SL-alu-drawbar system (coupling on the rear wheel axle of the bicycle) for almost all boats and boards. For very long canoes over 5 metres and very heavy boats, we recommend the high drawbar system (coupling on the seat post), as this runs in one axle during boat transport and can absorb the higher forces better.

Technical details
CNC-milled aluminium chassis
66 / 80 x 12 x 8 cm (LxWxH) Chassis width

82 / 96 cm Driving width incl. 16" wheels (standard axle adapter)
3.3/3.5 kg total weight (standard equipment)
Recommended load max. 45kg (standard equipment)

approx. 96 / 114 cm driving width (with extendable stainless steel axles)
4.0/4.2 kg total weight (with extendable stainless steel axles)
Recommended load max. 65kg (with extendable stainless steel axles)

Standard scope of delivery
  • Aluminium chassis, black powder-coated
  • 16 inch wheels with Schwalbe Big Apple tyres
  • Axle mounts made of GFK with cast-in brass sleeve
  • 2 integrated webbing eyelets for lashing down
  • 1 tensioning strap with clip hook

€0.00*

H2O
Product number: H2O-66-Customized
Extensions

Choose an extension here to adapt the H2O even better to your boat / board or other applications. For most boat and board applications our tubes fit. Only in a few cases (extra-wide boards or boats with very curved/V-shaped) hulls are the Wings necessary.

Ein Fahrradanhaenger aus Aluminium fuer SUP Kanu oder Kajak
Tubes
€0.00
Wings
Wings
€0.00
Reset choice

€0.00

Axles
Mandatory

Choose here between our standard axles and the extendable axles

Standard configuration H2O
Standard configuration H2O
€0.00
Stainless steel extension axles for H2O/80
Stainless steel extension axles for H2O/80
€0.00
Stainless steel extension axles for H2O/66
Stainless steel extension axles for H2O/66
€0.00
Wheels
Mandatory

The H2O comes standard with 16 inch wheels and the great Big Apple tyres from Schwalbe. These wheels are very compact and take up little space if the H2O is to be transported in the boat. Our 20 inch wheels, which we recommend for longer tours, have even better rolling characteristics on bad roads and obstacles. In particular, the Smart Sam tyre from Schwalbe is ideal for combined trips on asphalt and gravel. The larger wheel diameter gives the H2O more ground clearance.

Laufrad zum selber Bauen eines Fahrradanhängers
Wheel pair 16" x 2.00 Big Apple (black)
€0.00
Wheel pair 16" x 2.00 Big Apple (silver)
Wheel pair 16" x 2.00 Big Apple (silver)
€0.00
Wheel pair 20" x 2.00 Big Apple  (black)
Wheel pair 20" x 2.00 Big Apple (black)
€0.00
Wheel pair 20" x 2.00 Big Apple (silver)
Wheel pair 20" x 2.00 Big Apple (silver)
€0.00
Wheel pair 20" x 2.35 Smart Sam black
Wheel pair 20" x 2.35 Smart Sam black
€0.00
Wheel pair 20" x 2.40 black Super Moto X
Wheel pair 20" x 2.40 black Super Moto X
€0.00
Wheel 20" x 2.40 Super Moto X (axle system 15/25)
Wheel 20" x 2.40 Super Moto X (axle system 15/25)
€0.00
Low drawbar

For almost all boats and boards, we recommend connecting the bicycle to the trailer with a low drawbar. For boats over 5 metres long and for heavy boats over 45 kg, we recommend the high drawbar.

SL-aluminium-center-drawbar 1, fitted for drawbar extensions (Weber-System)
SL-aluminium-center-drawbar 1, fitted for drawbar extensions (Weber-System)
€0.00
Heavy-duty Drawbar extension 100 cm
Heavy-duty Drawbar extension 100 cm
€0.00
Heavy-duty Drawbar extension 80 cm
Heavy-duty Drawbar extension 80 cm
€0.00
Heavy-duty Drawbar extension 50 cm
Heavy-duty Drawbar extension 50 cm
€0.00
SL-alu-drawbar short H2O
SL-alu-drawbar short H2O
€0.00
H2O hull support for boats and boards SL drawbar system
H2O hull support for boats and boards SL drawbar system
€0.00
Bicycle hitch

Select a hitch for your bicycle here. This is permanently mounted on the bicycle and enables a secure and easy connection with your Hinterher. The hitches listed here work with the low drawbar.

Weber EL hitch
Weber EL hitch
€0.00
Weber E hitch
Weber E hitch
€0.00
Weber ES hitch (heavy-duty)
Weber ES hitch (heavy-duty)
€0.00
Weber EP hitch
Weber EP hitch
€0.00
Weber EH hitch
Weber EH hitch
€0.00
Weber EK hitch for Brompton
Weber EK hitch for Brompton
€0.00
Weber EK hitch for Brompton
Weber EK hitch for Brompton
€0.00
Weber EU hitch
Weber EU hitch
€0.00
Weber ER hitch
Weber ER hitch
€0.00
Weber ER hitch
Weber ER hitch
€0.00
Weber hitch E-RM (Riese+Müller)
Weber hitch E-RM (Riese+Müller)
€0.00
Weber BO without kickstand
Weber BO without kickstand
€0.00
Weber B with kickstand
Weber B with kickstand
€0.00
Weber-Hinterher Universal hitch
Weber-Hinterher Universal hitch
€0.00
SL-aluminium-drawbar (Weber-System)
SL-aluminium-drawbar (Weber-System)
€0.00
Weber EP Adapter Durchmesser: M5
Weber EP Adapter Durchmesser: M5
€0.00
Weber EP Adapter Durchmesser: M6
Weber EP Adapter Durchmesser: M6
€0.00
Weber thru-axle
Weber thru-axle
€0.00
Spacer sleeves M5 (2 pieces)
Spacer sleeves M5 (2 pieces)
€0.00
Spacer sleeves M6 (2 pieces)
Spacer sleeves M6 (2 pieces)
€0.00
Long quick release skewer
Long quick release skewer
€0.00
Weber Special Polygon
Weber Special Polygon
€0.00
Weber axle adapter (Shimano)
Weber axle adapter (Shimano)
€0.00
Weber axle adapter SRAM/Enviolo
Weber axle adapter SRAM/Enviolo
€0.00
High drawbar

For boats over 5 metres long and particularly heavy boats over 45 kg, we recommend our high drawbar system. Here, the drawbar is guided to the seat post and tied there with a seat post coupling.

SL-alu-drawbar in two parts, S-shaped (Weber connection)
SL-alu-drawbar in two parts, S-shaped (Weber connection)
€0.00
Heavy-duty Drawbar extension 100 cm
Heavy-duty Drawbar extension 100 cm
€0.00
Heavy-duty Drawbar extension 80 cm
Heavy-duty Drawbar extension 80 cm
€0.00
Heavy-duty Drawbar extension 50 cm
Heavy-duty Drawbar extension 50 cm
€0.00
SL-alu-drawbar short H2O
SL-alu-drawbar short H2O
€0.00
H2O hull support for boats and boards SL drawbar system
H2O hull support for boats and boards SL drawbar system
€0.00
Fahrradkupplung Hochdeichsel

Hier finden Sie unsere selbstentwickelte Sattelstützenkupplung mit Weber-Anschluss für die werkzeuglose Montage an der Sattelstütze.

Weber-Hinterher seatpost hitch
Weber-Hinterher seatpost hitch
€0.00
Zubehör

Hier finden Sie weiteres Zubehör für den H2O.

Ballistol universal oil spray can 200 ml
Ballistol universal oil spray can 200 ml
€0.00
Lashing-strap 200 cm with clip-hooks
Lashing-strap 200 cm with clip-hooks
€0.00
Lashing-strap 200 cm with clip-hooks Länge: 120 cm
€0.00
Lashing-strap 200 cm with clip-hooks Länge: 250 cm
€0.00
Loop cable 10/200
Loop cable 10/200
€0.00
Spare tube Schwalbe 16"
Spare tube Schwalbe 16"
€0.00